"Customers designing high-precision equipment need clean bipolar power rails for powering operational amplifiers, analog-to-digital converters or ...

With an integrated high-voltage power transistor and the high 64kHz switching frequency to reduce the size of the transformer and capacitors, designers can ...

Kepco is offering an option for both the 200-W and 400-W models in its BOP series of bipolar power supplies to enhance their ability to drive capacitive ...

iW1810 is rated to operate at 64 kHz switching frequency enabling the use of small size magnetics and and capacitors. iWatt says 3W AC/DC adpater power ...

Kepco is offering an option for both the 200-W and 400-W models in its BOP series of bipolar power supplies to enhance their ability to drive capacitive ...

"Customers designing high-precision equipment need clean bipolar power rails for powering operational amplifiers, analog-to-digital converters or ...

With an integrated high-voltage power transistor and the high 64kHz switching frequency to reduce the size of the transformer and capacitors, designers can ...

iW1810 is rated to operate at 64 kHz switching frequency enabling the use of small size magnetics and and capacitors. iWatt says 3W AC/DC adpater power ...

I need to replace the audio coupling capacitors between the various stages of a Luxman Pre-amp. Should I be using Bi-polar Electrolytic caps, or Polarised? The original caps are "Elna for Audio", but plenty of caps are starting to fail ...

White dirty stuff has come out of the bottom and it looks like they need replacement as well. The caps are "Gold Cap" 2.3V, 3.3F. Any idea what kind of capacitors they are (bipolar?) and where can I get them to replace them? ...

I need to repace the audio coupling electrolytics in my Luxman pre-amp. Should I be using Polarised or Bi-Polar Electrolytics? Originals are "Elna for Audio" Is it true that I should measure if there's any DC bias across the existing ...

About electrolytic (aluminium) capacitors..... what do the low ESR ones do that normal ones don't? And how come they have these capacitors in bipolar ...

Bipolar transistors and MOSFETs are found on the output stages of high powered amplifiers. They are fast enough and can handle enough current to send wattage greater than 20 watts per channel to your speakers. Both of these types of transistors are considered discrete .... NOTE OF CAUTION: Power capacitors store a large amount of energy and they charge very quickly. You must first "charge" your power capacitor using a resistor before connecting it directly to +12 volts . ...